Click on the image to check the artwork
REDSTAR 2PC Forged steel floating ball valve simply structure, good sealing, but ball support will transfer to sealing ring of outside. so floating ball valve suit for middle pressure or low pressure service.
Floating ball valve have two piece and three piece structure.
Full bore and reduce bore
Soft seat and metal to metal seat
Flanged ends, Butt welding ends, RTJ ends
Lever op.Gear Worm, Electric actuator, Penumatic Actuator etc.
2PC Forged Steel Floating Ball Valve
Specifications
SIZE : 1/2"~8"
End : RF / FF / RTJ / BW
Pressure: 150LB~1500LB
Inspection&test standard : API 598,API6D
HW, Gear, Manual,etc
Cryogenic Ball Valve
Size :1/2"~8"
Pressure: Class 150-1500lb
-
Main Material :A216-WCB,A217-WC6,WC9,C5,C42,A351-CF8,CF8M,CF3,CF3M,CF8C,CN7M,A105,A182-F11,F22,F9,F5,F304,F316,F304L,F316L,F321,ALLOY-20
Design Standard :
Design :API 6D / ASME B 16.34/BS 5351/API 608/ MSS SP-72
Face to face : ASME B 16.10,API 6D,EN 558
End Flange : ASME B 16.5 ,(DIN2501)
Butt welding ends : ASME B 16.25
Inspection and test : API 598. API 6D
Type of Inspection: Handwheel, Gear, Electric, Manual, Pneumatic, Hydraulic
Structural Features:
Splited body
side-entry.
2-piece.
To make a suit solution for the project , we need follow information.
Design standard.
Connection standard .
Size.
Body material .
Trim (Material for inside parts).
Connection type.
Operation type.
Medium.
Temperature.
Ambient temperature range . Corrosion considerations.
Application Descripetion.
Painting color.